Obvious
Could this belief have come about, mayhap, due to the extremely clear bulge that can be seen in the lines of the thing to accomodate said 3.5mm headphone socket?
Samsung has posted a teaser shot for its upcoming 8.9in Galaxy Tab, which for some reason interweb pundits believe proves the tablet will be a skinny affair. All you can really tell from the shot is that the gadget will have an earphones socket and a textured back. You can make anything look thin if you photograph it from the …
The geometry/perspective of the circular hole (viewed as an elipse but truely a circle on a 2d plane) allows you to derrive the angle of the camera to the device, Knowing the size of the circular hole allows you to measure the thickness of the device.
This post has been deleted by its author
Well, the aperture of the hole is clearly 3.5mm. So the outer diameter will be, what, 5? And there looks to be a 3mm gap between the front edge of the hole and the front surface of the tablet. Which would put the thickness of the device at about 8mm. Possibly 9. Not sure why the writer thinks that this exercise is so impossible or ludicrous.
measure the number of pixels between the upper most and lower most parts of the port, then assume that number of pixels is 3.5mm on that vertical axis, then measure the number of pixels between the top and bottom of the device, and scale?
I got 5.5mm at the thinnest point, which seems a little thin.